Touchscreen Protector Installation


 


MATERIALS:
1. SCREEN PROTECTOR
2. SPRAY BOTTLE
3. LINT-FREE CLOTH
4. HARD-CARD (NOT INCLUDED), USE STANDARD CREDIT CARD

PREPARE DEVICE
1. TURN OFF DEVICE
2. WASH HANDS, BE SURE TO REMOVE OILS AND DIRT
3. CLEAN DEVICE USING LINT-FREE CLOTH REMOVE
OILS, SMUDGES AND ALL LINT AND DEBRIS. CLEAN
DEVICE AND INSTALL SCREEN PROTECTOR IN CLEAN
INDOOR AREA FREE OF WIND AND DUST. REPEAT
CLEANING UNTIL DEVICE SCREEN IS COMPLETELY
CLEAN AND FREE OF ALL DUST, LINT.

PREPARE SCREEN
1. MOISTEN FINGERS TO AVOID LEAVING FINGERPRINTS
ON ADHESIVE SIDE OF FILM
2. REMOVE BACKING: PEEL BACK THIN CLEAR BACKING.
DO NOT FOLD OR KINK FILM
3. SPRAY STICKY ADHESIVE SIDE OF SHIELD WITH
INSTALLATION SOLUTION, APPLY EVEN MIST ACROSS
ENTIRE SURFACE (7-10 PUMPS) FORMING EVEN LAYER
OF DROPLETS ON ENTIRE SURFACE OF SCREEN
PROTECTOR, DO NOT SPRAY DEVICE

APPLY SCREEN PROTECTOR
1. APPLY SHIELD TO DEVICE SCREEN, PLACE ONTO
DEVICE ADHESIVE SIDE DOWN, USE BUTTONS,
SPEAKERS AND EDGES AS REFERENCE TO ALIGN FILM
2. WRAP HARD-CARD IN LINT FREE CLOTH, USE
HARD-CARD TO PUSH MOISTURE FROM CENTER TO
EDGES, CONTINUE UNTIL ALL MOISTURE AND
BUBBLES ARE REMOVED, DO NOT PUSH WATER INTO
SPEAKERS OR PORTS

CURE SCREEN PROTECTOR
1. WAIT 15-20 MINUTES BEFORE TURNING ON DEVICE
TO ALLOW SHIELD TO FIRMLY ADHERE TO DEVICE
SCREEN
2. ALLOW 5-7 DAYS FOR ALL MOISTURE AND HAZE
BEHIND SHIELD TO EVAPORATE
3. USE HARD-CARD OR FINGERNAIL TO SET EDGES 2-3
TIMES/DAY FOR FIRST 3-5 DAYS

SCREEN PROTECTOR REMOVAL
1. USE HARD-CARD AT CORNER OR NEAR BUTTON TO SEPARATE SHIELD FROM DEVICE
2. SLOWLY PEEL BACK